Zum Inhalt springen
soundsprofessional Logo soundsprofessional Logo
  • Home
    • Filmtonmeister
    • Ton-Angler
    • 360° Ambisonics und Geräusche
  • Shop
  • Kontakt
  • Deutsch
  • Englisch

Sennheiser HD25

Startseite>HD25>Sennheiser HD25
Zurück

Sennheiser HD25

Von Till|2019-05-05T16:45:54+02:00Mai 5th, 2019|0 Kommentare

Share This Story, Choose Your Platform!

FacebookTwitterRedditLinkedInWhatsAppTumblrPinterestVkXingE-Mail

Über den Autor: Till

Du musst angemeldet sein, um kommentieren zu können.

Partner

  • Till A. von Reumont
  • Jochen Schmitt

News

  • 3D-Druck fürs Filmset
  • Wild tracks at the Brandenburger Tor
  • Mehr Ausrüstung!
  • Neue Geräte
  • RF Explorer und Tentacles

Insta

New #ambisonics mic for all our wild tracks from n New #ambisonics mic for all our wild tracks from now on! #sennheiser #ambeo #360°
Finally #homeoffice is over! #adato #filmmaking #s Finally #homeoffice is over! #adato #filmmaking #soundmixer #wine #rosé
Are you tired of always plugging in the micro USB Are you tired of always plugging in the micro USB the wrong way? This dock used for easy charging of the Ambient Nano Lockit timecode generator we designed solves this problem. Simply slide the Lockit into this handy little dock and you're good to go. 3d print your own for free at thingiverse.com/soundspro . . . . . . . #productionsound #3dprinting #cad #freecad #thingiverse #ambient #timecode #nanolockit #boomoperator #usb
Is it #faderfriday yet? No! But #darthfader don’ Is it #faderfriday yet? No! But #darthfader don’t care! #3dprinting #soundmixer #productionsound #sounddevices #stormtroopers
My workflow for perfect frequency coordination 1. My workflow for perfect frequency coordination 1. Turn off all my transmitters. 2. Initiate a new spectrum scan in the sound devices 688 and SL-6. 3. Write down where the free spaces are in the spectrum. 4. Open the FreqFinder by New Endian App and disable all but the first two rows. 5. Choose a first frequency for the first transmitter that’s in one of the free slots written down earlier. 6. For the second transmitter, tap on “compatible channels” in FreqFinder and chose the second frequency so it’s also still within the free space we found earlier. 7. Enable channel 3 in FreqFinder and proceed with “compatible channels” in the free parts of the spectrum till all channels are set.
3d-printed sliding part prevents pressing stop but 3d-printed sliding part prevents pressing stop button in case of end-boards #productionsound #soundmixer #sounddevices #cl12 #sounddevicescl12
From the outside to inside the house through the d From the outside to inside the house through the door steady cam shot: Being #boomoperator for @tvnow.de series #gefärlichenähe with #barnabymetschurat was tons of fun! @ambientrecording #quickpole helped immensely with their precision poles. @sonypictures.de
For this shot in a driving car we installed DPA 40 For this shot in a driving car we installed DPA 4060 wireless mics and captured dialogue without a boom mic. Worked very well and sounded like a car. 😀 The Lectrosonics transmitters were hidden in the glove compartment.
Follow!
Copyright 2012–2020 soundsprofessional | All Rights Reserved | Impressum | Datenschutzerklärung
Crew UnitedCrew UnitedFacebookInstagramTwitterWhatsAppE-MailTelTel
Page load link
This website uses cookies and third party services. Ok
Nach oben